Safety

Psychosocial Hazards Awareness (WA)

WorkSafe WA's 21 hazards on electrical and FIFO jobs, who must fix them, and how to speak up.

Estimated time2 Hours
FormatOnline, self-paced
On completionCPD certificate

Course Overview

Western Australia’s work health and safety laws have covered psychosocial hazards since 2022, and WorkSafe WA names 21 of them in its code of practice, with fatigue and burnout as hazards in their own right. This online, self-paced course is for electricians, apprentices, supervisors and contractors working in WA, including on FIFO and remote sites, and anyone else on a WA construction site. It is written to WA’s Work Health and Safety Act 2020 and WorkSafe WA’s codes, not adapted from another state’s rules.

The 21 hazards, on WA jobs

After the definition in WA’s WHS Regulations, the course walks the 21 hazards in five groups with a WA example for each: overtime every night before handover, no say in sequencing, a cyclone that closes the airstrip at the end of a swing, a partner calling the site to check up on someone, harassment at the camp wet mess after shift. A roles lesson sets out the duties of the business, its officers, workers and others on site, the consultation duty, and WA’s four codes of practice: psychosocial hazards in the workplace, workplace behaviour, violence and aggression at work, and mentally healthy workplaces for FIFO workers. It also covers a duty the national rules do not spell out: when the business provides accommodation, it must consider the camp’s design, layout and conditions when it manages psychosocial risk.

Rosters, camps and the long drive home

The risk lesson applies identify, assess, control and review to a shutdown and keeps the order straight: change the roster first, then support the worker. The fatigue lesson works through WorkSafe WA’s working hours code (night shifts kept to a minimum, a break of at least 24 hours after each set, travel time counted) and its FIFO code (even-time or shorter rosters, shifts that rotate forward), with a Pilbara swing and a four-hour drive home as the example, and a roster checker you fill in yourself. Remote work and isolated work are separate hazards in WA, and the course covers the controls for a small crew on a remote solar farm. Bullying, harassment, violence and aggression follow, with a WA mining enforceable undertaking as the case study.

What you leave with

The final lessons cover noticing a change in a workmate, a four-step check-in practised in a scenario, reporting a hazard as a safety report, what to do if the business does nothing (WorkSafe WA on 1300 307 877, or a complaint online), and what should be in place before a traumatic event such as a serious shock or an arc flash. Five WA templates come with the course as PDF and Word files: a crew conversation guide, a psychosocial risk assessment, a construction action plan, a traumatic event management plan and a toolbox talk. On completion you receive a certificate of completion and a signed training record listing the topics covered. For the personal-wellbeing side, pair it with Managing Mental Health in Construction. Crews working outside WA should take the national version, which follows the model WHS laws.

What You’ll Learn

Explain what a psychosocial hazard is under WA's WHS Regulations and WorkSafe WA's code, the harm it can cause, including burnout, and how exposure and combined hazards add up
Spot the 21 hazards named in WorkSafe WA's code and how they show up on electrical, construction and FIFO jobs, including fatigue, burnout, remote and isolated work, insecure work and family and domestic violence
Describe what the business, its officers, workers and others on site must each do, and when the business must consult workers and their HSRs
Know the WA Work Health and Safety Act 2020 and its psychosocial regulations, WorkSafe WA's four codes of practice and what each is for, and the duty to consider workers' accommodation
Follow the four-step risk management process with consultation at every step, and tell a control that changes the work from one that supports the worker
Recognise work demands, low control, unclear roles and fatigue on electrical and FIFO jobs, and apply the roster controls in WorkSafe WA's working hours and FIFO codes, including on-call work, travel time and breaks after night shifts
Recognise bullying, harassment, violence, aggression and conflict on site and at workers' accommodation, the line between reasonable management action and unreasonable behaviour, and the stop-bullying routes through the Fair Work Commission and the WA Industrial Relations Commission
Spot the early signs of harm in a workmate and check in, raise a hazard on site and, if nothing changes, with WorkSafe WA, know what should happen after a traumatic event, and where to get confidential support

What’s Included

Self-paced online module
Knowledge assessment
Certificate on completion
Approx. 2 Hours
Records CPD hours
Records your CPD hours

On completion you’ll receive a certificate recording your CPD hours, ready to add to your professional development record.

Training a team?

Buy 2 or more seats and your company group is set up automatically.

One link for your whole team - Share it (or the QR code) and each person is enrolled as they join.

Everyone registers as themselves - Each certificate is issued in the learner’s own name.

You see everyone’s progress - Your purchase makes you the group manager.

Need more seats later - Buy the same course again and they’re added to your existing group.

Frequently Asked Questions

Why is there a separate WA course?
WA’s code names 21 hazards where the national model code names 14. It treats fatigue and burnout as hazards in their own right, splits remote work from isolated work, and adds insecure work, family and domestic violence, adverse natural events, and vicarious and secondary trauma. WA also requires the business to consider workers’ accommodation. The regulator, the codes, the contact number and the complaint route are all WA’s. A course written to the model code would get those wrong.
Does it cover FIFO camps and rosters?
Yes. Roster controls from WorkSafe WA’s working hours and FIFO codes, the accommodation duty (the same room each swing, rooms away from the wet mess, soundproofing and blackout curtains are the code’s examples of good practice), contact with home, cyclone and flood disruption, and harassment at the camp as well as on site.
Is this course approved by WorkSafe WA?
No, and WA has no approval scheme for psychosocial training. The course is built on WorkSafe WA’s four codes of practice and WA’s WHS Regulations, and the templates follow them. Our WA silica course is listed by the regulator under a different scheme that does not apply here.
What can I do if I report a hazard and nothing changes?
Raise it again with your supervisor or HSR, or at a toolbox talk, and keep your record. Then contact WorkSafe WA on 1300 307 877 or lodge a complaint online; WorkSafe WA does not look at events more than two years old. For bullying, the Fair Work Commission or the WA Industrial Relations Commission can make a stop-bullying order. If anyone is in immediate danger, call 000.
How is this different from the Mental Health in Construction course?
That course works on the person: warning signs and the PACE habits for staying well. This one works on the job in WA: the 21 hazards, who has the legal duty to fix them, the FIFO and accommodation rules, and how to report. Many crews do both. Supervisors usually need this one first.
Does this course count toward my CPD or licence renewal?
This course records self-paced professional development, with a certificate of completion documenting your learning. It is not represented as an approved licence-renewal or skills-maintenance course. Renewal requirements are set by your state or territory regulator; see our state-by-state electrician licensing guide and confirm what applies to your licence before relying on any course for renewal.

Related Courses